Developed jointly by Spitfire Audio and AIR Studios, AIR Studios Reverb is a convolution reverb plug-in that recreates the acoustics of Lyndhurst Hall, a celebrated film-scoring venue, using more than 67,000 impulse responses. Virtual Positioning Technology lets you place sounds around the hall, blend eight microphone signals and adjust aspects of the room itself. With 54 presets and an intuitive interface, it combines a realistic acoustic character with flexible control, making it especially appealing for orchestral, classical and film-score production. This review describes the product and compatibility information available when the article was written in June 2024.
An ambitious reverb from Spitfire Audio and AIR Studios!
At the time of this review, Spitfire Audio, best known for its orchestral libraries, had released its AIR Studios Reverb effects plug-in.
Developed with the renowned British recording studio AIR Studios, it recreates the acoustics of Lyndhurst Hall, a venue particularly famous for film-score recordings. It was Spitfire Audio's first effects plug-in.
Beyond recreating a legendary acoustic space, it lets you control sound placement and reverberation visually, offering an impressively realistic and customizable experience.
Let's explore what AIR Studios Reverb can do.
AIR Studios Reverb introduction video: from approximately 50:23
About AIR Studios Reverb
Key features
- More than 67,000 impulse responses capture detailed acoustic configurations.
- Virtual Positioning Technology lets you position sound sources around the hall.
- Select and blend eight different microphone signals.
- Adjust canopy height and material, as well as gallery damping.
First, listen to the examples to get a feel for its sound and quality.
We prepared the same dry strings with the reverb switched off and on.
We simply selected a strings preset, yet the result conveys a convincing sense of being in a hall.
A vast IR collection for a wide range of sounds
AIR Studios Reverb is a convolution reverb that uses impulse responses recorded in the actual hall.
As well as providing a realistic character, its collection of approximately 67,000 IRs captures a broad range of relationships between sound-source and microphone positions.
It combines the realism of recorded IRs with the ability to explore many different configurations, rather than relying solely on a conventional algorithmic reverb design.
Intuitive sound placement with Virtual Positioning Technology (VPT)
Spitfire Audio's proprietary Virtual Positioning Technology (VPT) lets you drag and drop a sound source to your chosen position.
That freedom makes the plug-in especially interesting if you want to create a realistic orchestral space.
Apply AIR Studios Reverb to a track and move the source around to control its changing reverberation visually.
Let's change the position of the reverb applied to a violin.
- Position 1
- Position 2
- Position 3
The reverberation changes noticeably with the source position, illustrating the different responses captured around the hall.
Shape the sound with eight microphone signals
Alongside source placement, you can select and blend eight different microphone signals.
Adjusting each microphone signal's level and characteristics gives you detailed control over the balance and character.
This makes it possible to tailor the reverb to a particular instrument or sound.
Customize the hall while preserving a realistic acoustic character
AIR Studios Reverb also lets you change physical aspects of the hall and recording setup, including performer orientation, canopy height and material, and acoustic absorption, while retaining the character of a real space.
Rather than only changing an abstract reverb algorithm, you can choose room configurations that reduce the reverberation naturally.
Let's try changing the performers' orientation.
- Layout A: Facing the control room
- Layout B: Facing the organ
In Layout A, the performers face the control room. We hear a more direct, clearly defined character.
It has the feel of a traditional concert-hall recording.
In Layout B, the performers face the organ. The sound feels wider and more richly reverberant.
This gives the deep, enveloping character associated with film-score recordings.
The plug-in also includes 54 presets for a variety of instruments.
The presets offer realistic starting points tailored to different instruments, but if you want to fine-tune the sound for a particular acoustic context or instrument, open the SOURCE controls.
SOURCE displays an object within a circle labeled BACK, RIGHT, FRONT and LEFT.
Drag and rotate the object to change the direction in which the source radiates sound.
The faders on the right let you adjust the amount of sound radiated in different directions in more detail.
As you move each fader, the object changes too, providing a clear visual representation of the settings.
Here is what the parameters control.
- Left / Right: Adjust how much the source radiates toward the left and right.
This affects the spatial impression and stereo character. - Back / Front: Adjust how much the source radiates backward and forward.
This can change the impression of depth and distance. - Up: Adjust the amount of upward radiation.
This affects the sense of height and space. - SUB: Adjusts the low-frequency component.
At 100%, the full low-frequency character of the captured space is retained; lowering it reduces the low end.
Blend in direct sound naturally
DIRECT LEVEL, in the SHAPE section, adjusts the level of the direct sound.
The direct sound is the component arriving directly from the source, before the later reverberation. This control determines how prominently it stands out within the overall sound.
Raising the direct level can make the source's location feel more clearly defined.
In this vocal example, we use Direct to blend in the direct component.
With a conventional dry/wet blend, the dry signal can feel closer to the listener. Direct lets the original sound remain audible while giving the impression that the performance is farther back in the space.
Wet 100% / Direct 200%
Placing a track farther back would normally involve careful EQ and dynamics processing of its dry component. AIR Studios Reverb makes this kind of positioning easier.
The other four parameters let you shape the overall reverb character in more detail.
Here is a breakdown.
- EARLY LEVEL: Adjusts the level of the early reflections.
Raise it to emphasize those reflections, or lower it to soften them. - EARLY STRETCH: Adjusts the time scale of the early reflections.
Increasing it spreads them over a longer time; decreasing it compresses them into a shorter time. - TAIL LEVEL: Adjusts the level of the later reverb tail.
Raise it to make the tail more prominent, or lower it to reduce its audibility. This is a level control, distinct from the tail-length adjustment below. - TAIL STRETCH: Adjusts the time scale of the reverb tail.
Increasing it extends the tail, while decreasing it shortens the tail.
Uses beyond orchestral music
Although AIR Studios Reverb offers many controls, it is still a hall reverb. It excels in particular settings rather than being the answer to every mixing situation.
It is especially suited to music, scenes and sounds that call for a grand or dreamlike atmosphere.
The Direct control discussed above is particularly useful for placing sounds at different depths.
In the following demo, AIR Studios Reverb provides all of the reverberation.
In the EDM-style build-up, we automate the dry/wet balance to help create a rising sense of anticipation.
Treat it as one example of how the plug-in can be used.
Creating a rising build-up with reverb
As with convolution reverbs in general, CPU demand can be relatively high. Using a separate instance on every track may make a project heavy even on a fairly recent computer.
Installation
Finally, here is the installation workflow described in the original review.
Installing AIR Studios Reverb requires the Spitfire Audio App.
First, download and install the Spitfire Audio App from Spitfire Audio's official website.
Spitfire Audio website: AIR Studios Reverb product information
Once the app is installed, open it, sign in and install the product from your library. The original article refers to the INSTALLED section; the precise available control depends on the app version and whether the product is already installed.
Final thoughts
AIR Studios Reverb makes it easy to create a natural sense of placement and distance, helping the listener perceive a sound as coming from a particular position.
It is especially well suited to orchestral music, film scores, ambient and electronic music that emphasizes the character of a space.
Explore its sound and decide whether this kind of detailed hall ambience suits your work.
The original review also noted that the product was not compatible with Ableton Live 11 at that time. Check the manufacturer's current compatibility information before purchasing.
Frequently asked questions
Q1. What does convolution reverb mean in AIR Studios Reverb?
Convolution reverb uses impulse responses recorded in a real acoustic space to recreate its character. AIR Studios Reverb contains approximately 67,000 IRs, capturing a detailed range of source and microphone positions rather than relying only on a conventional algorithmic reverb design.
Q2. What does Virtual Positioning Technology (VPT) do?
It lets you drag and drop a sound source to your chosen position in the hall. Moving it changes the resulting reverberation, with visual controls that make it easy to try different placements and create a convincing orchestral layout.
Q3. What styles of music suit this reverb?
It is particularly well suited to orchestral, classical and film-score production. Its 54 presets provide starting points for different instruments, while detailed controls let you tailor the hall sound for strings, vocals, wind instruments and more.
NEW ARTICLES
Latest English Articles
































